Table 2.5. Basic types of failures of units and elements of the docking assembly, possible causes and consequences. and the execution of flight. After this one can work out the valid requirements on their reproduction during testing. One should also analyze the use of mass-produced or specially ordered elements of construction (electrical engines, brakes, microswitches, etc.) and control devices (relays, diodes, etc.) usually called set elements. Maps of the work modes chosen, considering specific supplies, should be compiled for these elements. Also involved in these issues is the solution of the problem of distributing
RkJQdWJsaXNoZXIy MTU5NjU0Mg==