TABLE 3 Taper Ratios for Selected Optimum Distributions. TABLE 4 Fraction of Power Collected vs Nondimensional Power Parameter 1/1. right-hand side above is calculated by the computer and for selected values of /3 is exhibited in Table 4. The power density at the center of the receiver is directly related to the power density at the center of the transmitter from equation (65). Putting r = p = 0, we have Using these equations, a calculation of the center densities for the two cost ratios and the two values of power received is given in Table 5 for /3 = .95. The major constraint is the po(O) — 230 watts/meter2. The criterion is easily met. The constraints for the power density at the center of the transmitter are, in the writers’ opinion, much
RkJQdWJsaXNoZXIy MTU5NjU0Mg==