(11) Lien, E. L. , "High Efficiency Klystron Amplifiers’, Eighth Int. Conf, on Microwave and Optical Generation and Amplification, pp. 11-21 to 11-27; September 1970. (12) Kosmahl, H. G. and Albers, L. V. , "Three-Dimensional Evaluation of Energy Extraction in Output Cavities of Klystron Amplifiers", IEEE Trans, on Electron Devices, Vol. ED-20, No. 10, 11. 883-890; October 1973. (13) Walder, J. and McIsaac, P. R. , "Experimental Analysis of the Biased-Gap Klystron", IEEE Trans, on Electron Devices, Vol. ED-13, No. 12, 11. 950-955; December 1966. (14) Kosmahl, H. G. , McNary, B.D. and Sauseng, O. , "High-Efficiency, 200-Watt, 12-Gigahertz Traveling Wave Tube”, NASA Tech. Note D-7709, Lewis Research Center, Cleveland, Ohio; June 1974. (15) Neugebauer, W. and Mihran, T.G., "A Ten-Stage Electrostatic Depressed Collector for Improving Klystron Efficiency," IEEE Trans, on Electron Devices, Vol. ED-19, No. 1, pp. 111-121; January 1972. Kosmahl, H. , "A Novel Axisymmetric Collector for Linear Beam Microwave Tubes,” NASA Tech. Note D-6093, 1971. (16) Stankiewicz, N. , "Evaluation of Magnetic Refocusing in Linear-Beam Microwave Tubes”, NASA Tech. Note D-7660, Lewis Research Center, Cleveland, Ohio; May 1974. (17) Feldman, Jr., K. T. and Whiting, G. H. , "The Heat Pipe”, Mechanical Engineering, pp. 30-33; February 1967. (18) Dutcher, C.H. and Burke, M. R. , "Heat Pipes -- A Cool Way to Cool Circuitry”, Electronics, pp. 94-100; February 16, 1970. (19) Anand, D.K. , ed. , Report on Heat Pipe Symposium/Workshop, The University of Maryland, College Park, Maryland; November 5-6, 1973. (20) Nishida, J. M. and Broderson, L. K. , "Design, Construction and Evaluation of a 12. 2 GHz 4. 0 kW-CW High Efficiency Klystron Amplifier”, NASA Contractor Report CR-134659, Varian Associates, Palo Alto, California; August 1974. (21) Branch, G. M. , "Circuit Efficiency Enhancement Studies at 12 GHz", NASA Contractor Report CR-72696, General Electric Co., Tube Department, Schenectady, New York; May 1970.
RkJQdWJsaXNoZXIy MTU5NjU0Mg==